How To Change Cabin Air Filter In Subaru Outback

Download Article

Download Article

The Subaru Outback air filtration organisation is designed to amend the quality of air in the cabin of the car. Replacing the filter volition likewise permit the air from the vents and the A/C to move more than freely throughout the vehicle. Information technology's recommended that you change your air filter once a year, or every 7,500 miles (12,100 km).^[1] The following steps outline how to change the filter, and merely a few simple tools are needed for the projection.

Steps Download Article

1. 1

   Remove the right dashboard panel next to the glove box. Remove all contents in the glove box. Locate the dashboard panel at the correct side of the glove box and pull it out. Utilize a flat-caput screwdriver to pry the panel from the dash.

2. 2

   Have out the glove box. Disconnect the stopper string of the glove box, which is found on the right side. Push in the sides of the glove box to release the knock pins. Unscrew the screws that hold in the knock pins 1/4 of an inch with a Phillips screwdriver. Remove the pins.^[ii]

   Advert

3. 3

   Remove the glove box stops from the rail grooves. Carefully put pressure on both sides of the glove box, 1 side at a fourth dimension, to loosen the stops from the tracks. Let the glove box driblet out of the way.^[3]

4. four

   Detach the owner's manual shelf. In the Subaru Outback and Legacy models, at that place is a raised shelf in the glove box that holds the owner's manual. Locate the owner's manual shelf on the right side of the panel. Use a Phillips screwdriver to unscrew the 3 screws attaching it to the console. Remove the shelf.

5. 5

   Remove the filter housing bracket. Unscrew the 3 screws on the filter housing subclass using a Phillips screwdriver. Remove the bracket. Remove the insulation on the bracket encompass.

6. 6

   Extract the former filter. Apply force per unit area to the iv clips on the front of the filter housing tray. Pull out the tray. Remove the onetime filter from the tray.^[iv]

7. 7

   Insert the Subaru replacement air filter. Identify the new filter in the tray. Ensure that the arrow for filter management that is indicated on the new filter is facing the right direction.^[five]

8. 8

   Place the tray back in the filter housing. Make sure the tray clips are in place.

9. 9

   Reinstall the glove box. Reconnect the associates of stops and rails grooves. Reinstall the panel side panel and the glove box installation screws. Lift the glove box up and replace the knock pins. Restore the dashboard panel.^[6]

Advertising

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

Advertisement

Things Y'all'll Need

• Replacement air filter
• Phillips screwdriver
• Apartment-head screwdriver

About This Article

Thank you to all authors for creating a page that has been read 73,920 times.

Did this article help y'all?

Source: https://www.wikihow.com/Change-a-Subaru-Outback-Cabin-Air-Filter

Posted by: marinohaductincer.blogspot.com

Share this post