How Do I Change The Battery In My Samsung Galaxy S6

How to change your Galaxy S6 and Galaxy S6 Border battery in five Steps

Past ETrade Supply | April 10th, 2015 | | 29

Since Samsung has made the Milky way S6 and S6 Edge with a non-removable battery, and with the bombardment capacity of these two batteries only beingness 2550 mAh and 2600 mAh, many people are wondering whether it's possible/how hard information technology is to replace the S6 and S6 Edge's battery? Samsung has released official battery change instructions inside their manual (Check it here), but this doesn't really give yous an idea of how difficult the chore is. Here our detailed guide will walk you footstep-by-pace through how to replace the S6 and S6 Edge battery. Want to change the battery? Check our guide out outset!

To supplant the Samsung Milky way S6 battery:

Tools yous need:

• Ejector Pin X ane
• Heat Gun/Hair Dryer Ten 1
• Metal Spudger Tool X 1 (to pry upwards the battery)
• Phillips Screw Driver X 1 (PH00 ane.5)
• Plastic Pry Tool Ten i
• Suction Cup X 1

Step i:

Shut downwards your S6 start earlier you do anything else, then use the Ejector Pin to take out the SIM card and SIM card tray.

Step 2:

Employ the Heat Gun/Pilus Dryer to heat up one end of the S6 for about ane~two mins (we kickoff from the lesser), then use the Suction loving cup to pry upwards the battery door a fiddling bit and insert the Plastic Pry Tool (or playing cards) in. Take your time during this step, the battery door adheres to the frame with some very strong agglutinative; if it'due south too hard to pry upward the battery door, try to use more oestrus, non force; use a sparse plastic pry tool instead of a razor blade in order to avoid damaging the glass. After the Plastic Pry Tool has been inserted in, oestrus upward the edges and and so gently slide information technology around the edge to open the battery door.

Stride 3:

Disengage the 13 screws around the middle plate, and so heat up the front of the S6 to loosen the adhesive around the eye plate. Pry up the screen assembly a picayune scrap with the aid of a Suction Cup and sparse Plastic Pry Tool, then slide the tool to separate the screen assembly (a little strength can exist applied to the back of the battery, but not too much, handle carefully and gently)

Step 4:

Disconnect the vi connectors that hold the motherboard every bit shown in the picture show to release it.

Step five:

Use the Metallic Spudger tool and insert it very, very carefully into the gap between the battery and screen assembly to pry information technology upwards because the battery adheres to the fragile AMOLED display directly! (Delight Note: Do not heat up the bombardment and do non bend the battery as well much; patience is needed!)

After these steps, you could replace the old battery with a new 1, and reassemble the Samsung Galaxy S6.

Want to supersede the screen of Samsung Milky way S6, check our tutorial here!

Replacing the Samsung Galaxy S6 and S6 border battery is not an easy job, we strongly practice not recommend people who have no/less experience attempting this.

Summary

Reviewer

Weinstein

Review Date

2015-06-08

Reviewed Item

Thanks

Author Rating

5

Source: https://www.etradesupply.com/blog/how-to-change-your-galaxy-s6-and-s6-edge-battery-in-5-steps/

Posted by: marinohaductincer.blogspot.com

Share this post